D F 2 S L H E A T F L O W : I N S T A L L A T I O N G U I D E
3
Step 6:
Remove heater and check the level, adjust if
needed.
(6)
Step 7:
Select most appropriate fixing method.
(7)
(8)
Step 8:
Depending on wall construction, drill holes for
appropriate fixing.
(9)
Step 9:
Insert two screws in the keyhole fixing points. Leave
approximately 15mm of the head exposed.
Step 10:
Using 1.5mm2 flex, cut the length required and strip the end.
(10)
