www.CONSOLECUSTOMS.com
Left or Mod Button
Functions
UP or Alt Button Functions
Pg. 10
All features of the MaxFire ONE have an advanced management option that allows you to
disable them. This is especially useful if you find there are features you do not use and do not
want the possibility to accidentally activate the feature.
Enter (AFM)
To enter the AFM, rapid fire must be turned OFF. Then HOLD
“A + B + Y + X”
together all at
the same time for 7 seconds. After 7 seconds you will see the WHITE LED flash 10 times very
fast. After this you can release all of the buttons.
Exit Advanced Feature Management
To exit AFM TAP the
“VIEW
” button. The WHITE LED will flash 10 times very fast.
Managing features
Now that you are in the AFM you can enable or disable any of the features listed below by just
tapping the corresponding button(s). When you tap one of the buttons you will see the
WHITE LED flash either 1 or 2 times.
1 flash = Feature is ENABLED, 2 flashes = Feature is DISABLED.
•
Jump Shot
•
Drop Shot
•
Fast Reload
•
Jitter Fire
•
GOW Reloads
•
Sniper Breath
•
Quick Scope
Advanced Feature Management
+ +
+
(7 sec)
•
Mimic
•
Rapid Fire
•
Auto Run
•
Auto Aim
•
Battlefield Spotting
•
Competition Mode
+
+
+
Pg. 9
+
•
LED MODE
There are 4 LED modes and the LED will flash 1-4 times when changing.
1. The LED is flashing while Rapid fire is on.
2. The LED is on Solid while Rapid fire is on.
3. The LED Flashes 1 or 2 times when turning Raid fire on or off.
4. The LED flashing is disabled for ALL feature activation.
•
FEATURE ACTIVATION
and
This option changes which button(s) will be used to activate features. There are 3 options for
the main button (LEFT) and 3 for the alternate button (UP). When changing an option the
LED will flash 1-3 times
1. Only Left On D-pad. 2. Left and Mod button used. 3. Only Mod Button
2. Only UP On D-pad. 2. UP and ALT button used. 3. Only ALT Button
+
+