Consilium Salwico CS4000, Руководство по установке

Страница: 39 / 277

Installation Manual
Appendix B: ID list
Salwico CS4000
29
Appendix B: ID list
The ID switch must be set on the address units type AE and NS-AIN. The ID
defines the function of the unit and type of unit connected to the address unit.
Setting the ID
The ID is set by the 4-pole (NS-AIN type) or 5-pole (AE type) DIP switch
located on the address units. The DIP switch value follows the binary system.
1 2 3 4 5
O
N
1 2 4 8 16
The value of the ID is according to the switches set to “ON” position, for
example:
1 2 3 4 5
O
N
= ID5
The switches numbered 1 and 3 are set to ON position. The values for
these switches are 1+4=5
ID for NS-AIN type address units
ID no. Type of NS-
AIN unit Type of connected device Switches to set
1 AIN2 Sprinkler 1
2 AIN1 Intrinsically safe unit 2
3 AIN1 Detector 1,2
4 AIN2 Conventional detectors 3
5 AIN1 Intrinsically safe unit
(industry) 1,3
6 AIN1 Detector(industry) 2,3
7 AIN2 Sprinkler & valve 1,2,3
8 AIN2 Indication 4
(NS-AIN1 has constant sub-loop voltage, while NS-AIN2 has pulse voltage).