background image

 

3

TABLE OF CONTENT 

1.  SAFETY AND WARNINGS 

2.  GUIDELINES REGARDING ASSEMBLY AND USAGE 

3.  SET UP AND INSTALLATION 

4.  OPERATION 

5.  MAINTENANCE AND DEFECTS 

6.  TECHNICAL DATA 

7.  ASSEMBLY DIRECTIONS, FLOOR TYPE BSR 105+107 

8.  ASSEMBLY DIRECTIONS, FLOORTYPE, BSR 117+119 

9.  ASSEMBLY DIRECTIONS, WASH ON SIDE, BSR 107 

10. DECLARATION OF CONFORMITY 

 
 
1.     SAFETY AND WARNINGS 

 

 

2.

 

GUIDELINES REGARDING ASSEMBLY AND USAGE 

 

Usage: 

  The electrical height adjustable changing table is designed to be used in a dry atmosphere  

(0-40°C; 20-90% relative humidity 

  For kids 0-36 months 

 

  The changing table height is infinitely adjustable, so that it can be set to the most ergonomically suitable 

working level of the staff in a day care center or public day care 

  Not been designed for other purposes than those included in this manual, e.g. they are not to be used in 

areas of high humidity or dampness, nor for lifting people. 
 

  Any other use is at one’s own risk! 

 

Safety routines: 

  Never leave the child unattended on the changing table 

 

  The remote should be placed out of reach of small children.  Switch off after use. 

  Be aware of other children in the room while in use. Do not crawl, lie or move around under the changing 

table.  

 

  When placing the changing table, be aware of other furniture. It is important with safety distance 

between the changing table and other furniture to minimize risk of jamming (?) at all. 
 

  Ved brug af højdeindstillingen skal man altid være særlig opmærksom på om nye ting er blevet placeret i 

rummet siden sidst. 

  The changing table is only to be used by the staff. The changing table is a work station, not a toy. 

  The remote control must not be used if there are any signs of damage or wear and tear. 

  If changing tables are mounted side by side a partition wall should be mounted to minimize risk of 

jamming. 

 

 

Please read the operation manual prior to start using the table. It provides you with important 

information about safety, use, installation and maintenance of the table, and thus protecting you 

and your children and avoiding damage on the table..

 

 

Please guard this operation manual and pass it on to any future owner!

 

Содержание BSR 105















Отзывы: