ConServ FR 650, Руководство пользователя, Страница: 7 / 8

6
MOVING YOUR APPLIANCE
•
Securely tape down all loose items inside your appliance.
•
Turn the leveling screw up to the base to avoid damage.
•
Tape the doors shut.
•
Be sure the appliance stays secure in the upright position during transportation. Also
protect the outside of appliance with a blanket or similar item.
ENERGY SAVING TIPS
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
TROUBLESHOOTING GUIDE
You can solve many common appliance problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM POSSIBLE CAUSE
Appliance does not operate. Not plugged in.
The circuit breaker tripped or a blown fuse.
Appliance is not cold enough. Check the temperature control setting.
Make sure the unit is away from direct
sunlight and heat sources.
Make sure there is adequate air flow at the
rear.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently. The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The appliance seems to make too much
noise. The appliance is not level.
The door will not close properly. The appliance is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
The following characteristics should not be looked upon as a problem.
-
A gentle trickling sound caused by the flow of the refrigerant is normal.
-
Compressor operating at high temperature.