ConServ FR 650, Руководство пользователя, Страница: 3 / 8

2
•
Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLING YOUR APPLIANCE
•
This appliance is designed to be free standing only, and should not be recessed or built-in.
•
Place your appliance on a level floor that is strong enough to support the appliance when it
is fully loaded. To level your appliance, adjust the front leveling leg at the bottom of the
appliance.
•
Allow 5 inches of space between the back and sides of the appliance, which allows the
proper air circulation to cool the compressor.
•
Position the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to
perform properly.
•
Avoid placing the appliance in moist areas.
•
Plug the appliance into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized Equator Products service center.
ELECTRICAL CONNECTION
•
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three -prong plug which mates with standard three prong wall
outlets to minimize the possibility of electrical shock.
•
Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
•
•
The cord should be secured behind the appliance and not left exposed or dangling to
prevent accidental injury.
•
•
The appliance should always be plugged into its own individual electrical outlet which ha s a
voltage rating that matches the rating label on the appliance. This provides the best
performance and also prevents overloading house wiring circuits that could cause a fire
hazard from overheated. Never unplug the appliance by pulling the power cord. Always
grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately
all power cords that have become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its length or at either end. When moving the
appliance, be careful not to damage the power cord.
~
Warning
~
•
Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, have it replaced by an electrician or an authorized service
agent
.