Conrad SL1007, Инструкция по эксплуатации

Страница: 32 / 39

32
For Viewing on Your home TV:
•
Attach the provided TV out cable to the TV port on the
bottom of the camera.
•
Insert the other end into the RCA VIDEO IN jacks on the
TV.
•
Turn on both the camera and the TV.
•
Make sure to switch to AUX / VIDEO IN mode on your TV.
( See your TV owner’s manual for directions).
•
The camera’s TV OUT is set to NTSC by default. (NTSC –
Standard North American TV format)
If the TV monitor doesn’t flicker, then you do not need
to change your camera’s TV OUT setting. Proceed to the
next section called Thumbnail Images.
If the TV monitor does flicker, then you will need to
proceed to the next step ‘
TV Out System Settings ” to
change your camera’s TV OUT from NTSC to PAL
(Standard European TV format).
•
You will see a series of thumbnail images on your TV.
•
Press the [UP] or [DN] button to navigate though your
thumbnail images.
•
On the upper left hand corner of your TV monitor, it will
either display the image OR the image with a
video icon which indicates it’s a video clip.
•
To view in full screen, press the [OK] button.
•
Press the [OK] button again, it will return to the
thumbnail view from the full screen image.