Conrad SL1007, Инструкция по эксплуатации

Страница: 28 / 39

28
•
Press the [OK] button and then [M] Button to exit.
•
30 seconds after you’ve made your adjustments, the laser
beam will begin blinking and enter count down mode.
This is your indication to leave the coverage area within
one minute.
•
After one minute, the camera will enter either Burst
mode or Video mode based on your program setting. The
camera will then time out between 05-59 seconds or 1-59
minutes, depending on your program setting.
NOTE: The time between motion detection and the
camera taking the pictures may vary due to lighting
conditions, program settings, and battery power level.
The IR Emitter will only be activated in low light
conditions.