27
4. Safety Information
In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal injury caused by improper use
or failure to observe the safety instructions. In such cases the guarantee/warranty will expire!
Dear Customer: The following safety information is intended not only for the protection of the device but also
for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a safety class 1 product. The only permissible voltage source is a proper grounded mains socket
(90-250 V/50/60 Hz) of the public mains. Never overload the socket, e.g. by connecting several devices that exceed
the total load capacity of the mains socket.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must be trained and
qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. Keep a safety distance of at least 8.5 m from the light
source when watching it. The bright light flashes may temporarily impair your eyesight. Apart from this, epileptic
fits may be triggered under certain circumstances in persons sensitive to such lights. This particularly applies to
epileptics.
• During commissioning and programming, no persons must be present within an area of less than 8.5 m of the light
exit for safety reasons.
• Never watch the light source with optical instruments like magnifying glasses, binoculars, etc.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye. Therefore, familiarise
yourself with the statutory regulations and measures of precaution for the operation of this kind of LED device
before using the device.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the respective
circuit breaker) and then carefully pull the mains plug from the mains socket. Separate the mains cable from the
device and replace it. Never use the product if the mains cable is damaged.
• When installing the device, make sure that the mains cable is not squeezed or damaged by sharp edges.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when handling
electrical devices.
