Conrad DV928, Руководство пользователя

Страница: 94 / 219

91
d) Display field "RAIN"

Briefly press the button " T " (16) or " S " (18) on the rear until "RAIN" blinks on the display (see arrow
in the image below).
The following setting options and displays are available now:

Switching the display data
Briefly press the button "SET" (7) or "MEMORY" (17) to switch between the following displays:
• Current rain quantity (display e.g. "1.0mm/hr")
• Rain quantity in the past hour (display "LAST HOUR")
• Rain quantity in the past 24 hours (display "LAST 24Hr")
• Yesterday's rain quantity (display "YESTERDAY")
• Rain quantity in the past week (display "LAST WEEK")
• Rain quantity in the past month (display "LAST MONTH")

Deleting the value memory for the rain quantity
Keep the button "MEMORY" (17) depressed approx. 3 seconds to delete the value memories.

Turning the rain quantity alarm on/off
You can activate an alarm for the rain quantity. When the set rain quantity is exceeded, an alarm is issued (stop this
by pressing the button "ALARM/CHART").
• Briefly press the button "ALARM/CHART" (10) to access alarm mode ("ALARM HI", bottom right of the display),
then briefly press the button " T " (16) or " S " (18) on the rear to activate/deactivate the alarm.

When the alarm is deactivated, the display shows "OFF"; when it is activated, the respective value.

Setting the rain quantity alarm
• First, briefly press the button "ALARM/CHART" (10) to access alarm mode (display "ALARM HI"). If the alarm is
deactivated, briefly press the button " T " (16) or " S " (18) on the rear to activate the alarm (if applicable).
• Now keep the button "ALARM/CHART" (10) depressed until the rain value blinks.
• You can change the rain value with the buttons "
T " (16) or " S " (18) on the rear (keep the respective button
depressed longer for quick adjustment).
• Save the setting by briefly pressing the button "ALARM/CHART" (10).
¨