Conrad DV206NL, Руководство по эксплуатации

Страница: 66 / 180

66
" SCAN " (reception test) is displayed on the bottom, and the "METEOTIME" reception symbol
to the left of the temperature display (on the left next to the IN/OUT symbol) starts to blink.
= perfect reception
= no reception
If necessary, change the installation site until " " is displayed.
The reception test is terminated automatically after one minute (or press the button "TEST"
again before). Of course, you can restart the reception test again. Proceed as described
above.
e) Selecting the country/city for the weather display
You can select up to 5 cities whose weather forecast can be displayed later with the buttons
"

" and "

".

Chapter 21 includes a list of all available cities.
Proceed as follows for selecting:
• Keep the button "SET" depressed (approx. 3 seconds) until " COUNTRY " appears on the
bottom of the display.
• With the buttons "

" and "

" select the country (e.g. " D/GER " for Germany) and confirm
your selection by briefly pressing the button "SET".
Now the display shows "
CITY ".
• Select a city with the buttons "

" and "

".
Confirm the setting by briefly pressing the "TEST" button. A small tick appears above the
name of the city.
Press the button "TEST" again to delete the city from the list; the tick disappears.

If " MEM. FULL " appears, all 5 slots are assigned.
You can save up to 5 cities to display their weather data. To save another city,
you first have to delete an available city from the list (see next chapter).
• Leave setup mode by pressing "SET".