a) Voltage supply via the enclosed power pack unit
This connection type may be used only for TV sets or receivers without 5V-
phantom power supply.
• Plug the antenna plug of the DVB-T antenna into the ANTENNA connector on the phantom
power adapter.
• Connect the antenna cable of the phantom power adapter (labelled with RECEIVER) to the
antenna connector of your TV set or receiver.
• Connect the low voltage plug of the power pack to the DC 9-12 V connector socket on the
phantom power adapter.
• Plug the power unit into a wall outlet of the public power supply grid.
• Once the antenna is receiving power, the function indicator on the phantom power adapter
lights up .
• Switch on your receiver and select a programme.
• Try to optimise the reception by changing the mounting position and alignment of the an-
tenna.
b) Power supply via a 5V-phantom power from the TV set/receiver
This connection type is only suitable for TV sets or receivers that feature a
5V-phantom supply.
To this end, read the information in the operating instructions of your TV set/
receiver.
• Connect the antenna plug of the DVB-T antenna with the antenna connector of your TV set
or receiver.
• Switch on your receiver and activate the phantom power for the antenna input.
• Select a program on the TV set.
• Try to optimise the reception by changing the mounting position and alignment of the an-
tenna.
a
b
Handling
• Never operate antenna or the power pack with damaged housing or missing covers.
• Never use the DVB-T antenna immediately after it has been brought from a cold room into a
warm one. The condensation that forms might damage the power pack or the antenna under
certain circumstances. Leave the antenna disconnected and wait until it has reached room
temperature. Wait until the condensation has evaporated.
• Never unplug the power pack from the mains socket by pulling on the cable; always use the
grips intended for this purpose.
• Unplug the power pack if you are not going to use the device for a while.
• For safety reasons, always disconnect the power unit from the mains socket during thunder-
storms.
• To ensure adequate ventilation, the antenna and the power supply unit must never be cov-
ered. In addition, the air circulation must not be obstructed by objects such as magazines,
tablecloths, curtains or similar items.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in echnology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE.
Maintenance and care
Before cleaning the product, disconnect it from the power supply (unplug the
power supply unit from the mains socket!).
Make absolutely sure that the inside of the device does not get wet or damp
The DVB-T antenna is maintenance-free; therefore do not open the case. If you do open it, the
warranty will be rendered null and void.
Periodically inspect the technical safety of the device for damage to the case, power supply,
etc. If the unit is damaged, it must be put out of operation and secured against accidental use.
The outside of the casing should be cleaned only with a dry, soft cloth or brush. Never use
aggressive cleansing agents or chemical solutions, since they might damage the surface of
the housing.
Disposal
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Technical data
Operating voltage ................. 230 V/50 Hz (power pack unit)
..............................................
5 V/DC (Antenna)
Power input ........................... 1 W max. (when operated via power supply unit)
Reception range ................... 47-870 MHz
Amplification ......................... 20 dB
Dimensions ........................... 136 x 204 x 20 mm
Weight .................................. 220 g