To perform auto search
:• Press and hold 2 seconds on
or
key, this unit will perform automatic scan
and stop when station catch up.
To perform manual search:
• Press
or
to adjust the frequency. Use this method to tune to weak or
distant stations that are not strong enough to be recognized by the automatic searching.
Note: One press is 0.05 MHz, the indicator will blinking on display.
e.g: 88.45 MHz
To store a station as a preset:
1. In Radio mode, press
or
key to adjust the frequency then press
key preset to program number.
2. Display will show “P01” and then press
key to store in P01.
You can also select the program number P01 - 20 by pressing
key.
.• You can save up to 20 channels in FM band To listen to a preset station
:• In FM mode, press
key to recall the preset station.
To turn on or off the stereo sound in FM mode:
• Press
key to turn on or off the stereo sound.
Antenna
FM antenna
• Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the
signal is too strong (very close to a transmitter).
USB connection to charge device
USB cable not included.
P.8