60
b) Modes de fonctionnement
L’appareil prend en charge les modes de fonctionnement « Répétiteur » et « Point d’accès ».
• Le mode de fonctionnement « Répétiteur » permet d’agrandir la portée d’un réseau Wi-Fi
existant. Les réseaux avec 2,4 GHz et un débit max. de 300 Mbps sont ici pris en charge.
Après la con
fi
guration et la connexion du répétiteur à votre routeur Wi-Fi, le répétiteur ne crée
pas un nouveau réseau Wi-Fi, mais ampli
fi
e le réseau existant.
Si votre ordinateur est déjà connecté au réseau Wi-Fi, il n’est donc pas nécessaire d’établir
une nouvelle connexion. Le répétiteur est alors automatiquement intégré au réseau.
☞
Avant de commencer la con
fi
guration, assurez-vous que votre routeur Wi-Fi soit
allumé et connecté à internet.
Il est également indispensable que le réseau Wi-Fi de votre routeur soit complète-
ment con
fi
guré. À cet effet, consultez également le mode d’emploi de votre routeur.
☞
Veuillez noter :
Si vous modi
fi
ez les paramètres Wi-Fi de votre routeur Wi-Fi après la con
fi
guration
du répétiteur, vous devrez également recon
fi
gurer le répétiteur. Le cas échéant, il
peut s’avérer nécessaire de d’abord réinitialiser les réglages d’usine.
La
con
fi
guration s’effectue ici au moyen de la fonction WPS ou par le biais de l’interface web.
Si vous con
fi
gurez l’appareil par le biais de l’interface web, votre ordinateur doit être connecté
à la prise Ethernet (LAN).
Les ordinateurs et les autres périphériques peuvent se connecter au répétiteur via le réseau
Wi-Fi ou via la prise Ethernet.
• Le mode de fonctionnement « Point d’accès » génère un nouveau point d’accès Wi-Fi avec
un SSID (nom du réseau Wi-Fi) librement dé
fi
nissable et le chiffrement inhérent.
Après la con
fi
guration, l’appareil est alors connecté à votre routeur à l’aide d’un câble Ethernet
1:1.
La con
fi
guration doit ici être effectuée à partir de l’interface web. Pour la con
fi
guration, votre
ordinateur doit être connecté au à la prise Ethernet (LAN) du répétiteur.
Après la con
fi
guration, les appareils peuvent ici uniquement se connecter par le biais du
réseau Wi-Fi.
c) Informations générales
• L’adresse IP prédé
fi
nie pour le produit est
192.168.10.233
.
• Le nom d’utilisateur et le mot de passe pour l’interface web sont tous les deux
« admin »
.