Conrad 75 15 57, Руководство по эксплуатации

Страница: 45 / 138

6. Product Description
☞
The figures are located on the front fold-out page.
Fig. A
1) Rain and sun protection
2) Camera lens, photosensor
and IR-LEDs
3) Attachment for mounting base
☞
The figures are located on the front fold-out page.
Fig. B
9) “Motion Detection” status LED
This LED is lit when movement is
sensed in the camera image.
10) “Record” status LED
This LED lights up when a record-
ing is being made.
11) “CAM1/2” button
- Press to turn the monitor on or
off.
- Press to manually switch bet-
ween the two camera channels
- Press and hold for 2 seconds to
turn the monitor off.
12) “REC” button
Start/Stop manual record
13) “PLAY” button
- Entering/exiting event playback
- Pause/Restart (playback mode)
44
4) DIN connection
5) Mounting base
6) Attachment screw 1
7) Attachment screw 2
8) Connection cable
There is a small opening on the rear of
the camera. This is the microphone.
14) “OK” button
For select and confirming selection
and for playback or stopping play-
back (playback mode).
15) “Vol-” button
- Navigation up
- Decrease the volume
16) “Vol-” button
- Navigation down
- Increasing the volume
17) IR receiver
18) SD card slot
(max. 1GB, SDHC supported)
19) Camera input 1 (CAM1)
20) Camera input 2 (CAM1)
21) Connecting the operating
voltage
(12 V/DC, 1A)