28
10. Operation
a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After switching on (putting the ON/OFF switch in the ON position), the light effect will perform a reset. Only
after this process is completed will the device be ready.
Use the display and buttons MENU and ENTER as well as the arrows to set the operating mode.
• Push the ENTER button to get to the menu selection for the individual menu items.
• Move through the menu using the arrows.
• Select menu items with the button ENTER and change the values or options to be set with the arrows.
• Confirm the selection with the ENTER button.
• To jump one level back in the menu or to call the last item selected again, push the button MENU.
Menu Overview
Menu Item
Option
Function
DMX Addr
001-512
Setting the DMX starting address
CH Mode
9
9-channel DMX operation
15
15-channel DMX operation
Work Mod
DMX
DMX mode
Auto
Automatic mode
Sound
Sound-to-light mode
Master
No
Device is in slave mode
Yes
Device is in master mode
Pan Inve
No
Normal rotating direction
Yes
Rotating direction is inverted
Tilt Inv
No
Normal swivel direction
Yes
Swivel direction is inverted
Soud Sen
00-99
Setting of the music sensitivity for sound-to-light operation
BK Light
Off
Automatic deactivation of the display
Always
The display is permanently on
Reset
No
No reset
Yes
Performing a reset (after approx. 10 seconds)
Factory Set
Menu for service purposes (please do not make any changes)
