• Unwrap the power cable fully during use. The power cable may not be squashed
or damaged on sharp edges. Do not place any objects on the cable and do not
step on the cable. Lay the cable so that no one can accidentally trip over it and so
that the plug is easily accessible. Do not lay the cable under rugs, etc.
• Never touch, use, plug in or unplug the product with moist or wet hands. This
poses a risk of fatal injury due to electric shock!
• Never connect the product to the mains directly after moving it from a cold to a
warm room (i.e. during transportation). This may cause condensation, which can
destroy the device or lead to electric shock. Let the product first reach room tem
-
perature. Wait until all condensation has evaporated – this may take up to several
hours. Only now may the product be connected to the power supply and operated.
• Only unplug a power plug by pulling on the provided grips, never pull on the power
cable to unplug the device.
• Do not overload the power strip. Heed the power rating in the chapter “Technical
data”.
• Do not connect the product in series! This may overload the power strip. This
poses a fire hazard! Connect the power strip‘s safety plug directly to a mains
outlet. Do not connect any more power strips to the product.
• Do not operate the power strip covered! The higher the connected load, the more
the power strip and power cable will warm up, which can cause overheating and
possibly a fire if the product is covered.
• The power strip is voltage-free only once it is unplugged.
• Unplug the product under the following conditions:
- before cleaning the product
- in case of a storm
- for extended periods of disuse.
• Never pour liquids above or near the product. This poses a great risk of fire or
fatal injury due to electric shock. Should any liquid enter the device interior, turn
off the mains outlet to which the power strip is connected entirely (fuse/automatic
circuit breaker/residual current-operated device). Now unplug the power strip and
contact a professional. Discontinue use of the product.
• In industrial facilities, heed all applicable accident prevention regulations for elec-
trical installations and equipment.
• The use of electrical devices must be supervised by trained staff in schools, train-
ing centers, hobby and do-it-yourself workshops.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Installation
Do not bend or squash power cables. Doing so may cause malfunction, short-circuit
or damage to the product. Make sure not to damage any cables or power wiring
when drilling holes in the wall or screw mounting to predrilled holes.
When choosing a mounting site, note that the plug strip may only be mounted on a
smooth, inflammable, and dry surface.
On both ends of the plug strip there are openings appropriate for mounting the unit. Mount
the power strip using suitable fastening material to a secure and even surface (i.e. a wall) as
needed.
Operation
Make sure that the power strip is voltage-free before connecting devices.
• Plug the power strip plug to your mains outlet.
• Plug in up to six devices to the power strip outlets.
• Now turn on the power strip by pushing the ON/OFF main switch. When the device is on, the
red power indicator in the ON/OFF main switch lights up.
• The surge protection indicator lamp lights up to show that surge protection is active. If the
indicator lamp is not lit, surge protection is not active.
Operating instructions
Surge protected 6 socket power strip
Item no. 1296313
Intended use
Use this power strip to turn on/off connected devices using the built-in ON/OFF main switch.
The surge protection indicator lamp lights up to show that all connected devices are protected
against electrical power surges. The total power consumption of all connected devices may not
exceed 3680 W. The product may be used in dry, closed indoor spaces only.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power strip
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The product is equipped with a protection against accidental contact. An inte-
grated mechanism will release the holes of the receptacle only, if the two prongs
of a power plug are inserted into the two holes at once.
• Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• Only use a properly installed mains outlet of the public power supply
(230 V/AC, 50 Hz) as a power source.
• The mains outlet must be located near to the device and be easily accessible.
