18
11. Programming the hand-held transmitter
The house code, an address group and a subaddress are used for coding
the transmitters and their individual buttons. You can also use special
address group assignments to program the hand-held transmitter as a local
or global master.
To set the addresses and codes, the 4 buttons on the hand-held transmitter
are used, which have the numbers 1, 2, 3 and 4.
1
Number ‘1’
3
Number ‘3’
2
Number ‘2’
4
Number ‘4’
a) Setting the house code
Once the battery has been inserted the hand-held transmitter
selects a random house code.
To choose your own house code, proceed as follows:
• Keep both left buttons on the hand-held transmitter (buttons
1
and
3
) pressed for 5 seconds until the control indicator/LED (
A
) begins
to blink every second.
• Now use the 4 buttons to enter your system’s 8-digit house code. This
must be identical for all the remote control transmitters in the same
system (as a precaution, make a note of this code and keep it safe!).
Example:
23141342
• The programming mode ends automatically once you have entered the
eighth digit. The control indicator/LED (
A
) goes out.
Содержание FS20 S4
Страница 1: ...Version 12 06 OPERATING INSTRUCTIONS 2 4 channel hand held transmitter FS20 S4 Item no 62 30 25 ...
Страница 29: ...29 ...
Страница 30: ...30 ...
Страница 31: ...31 ...
