Conrad Electronic FAZ3000-FB-2, Руководство по эксплуатации, Страница: 8 / 24

8
6. Controls
1
‘ ext. ’ button (= ‘externally armed’)
2
‘ int. ’ button (= ‘internally armed‘)
3
LED
4
‘ unscharf ’ button (= ‘disarmed’)
5
Opening to attach to a key ring
The cover of the battery compartment is
located at the rear side of the remote
control.
a) Normal button functions
‘unscharf’ (disarm) button (
4
)
• This button is used to ‘disarm’ the alarm base station.
All sensors except the smoke detectors are deactivated. You can move
around your house freely without setting off the alarm.

An alarm is always triggered when a smoke detector or a glass
break sensor (terminal KL1, NO contact required) connected to
the ‘FAZ-TF’ door/window sensor is triggered.
• A triggered alarm can be stopped by pressing the ‘ unscharf ’ (disarm) button
(
4
). The alarm memory is deleted when this button is pressed again.
‘int.’ button (
2
)
• The ‘internally armed’ mode of the alarm base station is set. This is used
to protect the outer shell, for instance, for protection inside a house at night.
One can move inside the house freely. Ensure that the sensors are
configured accordingly (internal/external sensor).
• The activation is rejected when the button is pressed for the first time if
there is a fault or a magnetic contact is not closed (for instance, a window
is open). The ‘internally armed’ mode is forced to be set when the button
is pressed again.
1
2
3
4
int.
ext.
unscharf
5