Conrad Electronic 85 59 17, Руководство по эксплуатации

Страница: 19 / 52

18
• For safety and licensing reasons, unauthorized conversion and/or modifications to the set are not per-
mitted.
• The device is intended only as an aid for reversing; it does not absolve the driver from practicing due
diligence. The device’s method of operation may mean that certain obstacles are not detected, or are
not reliably detected.
• The device is only fully functional during slow driving. The warning may not be emitted in time if the
vehicle is moving at faster speeds.
• The device’s performance may be negatively affected by large amounts of dirt on the sensors or by
the effects of exhaust gas.
• The sensors must not obstruct the vehicle’s rear lights, the number plate or any other of the vehicle’s
equipment and they must be flush with the edge of the vehicle.
• When installing and operating the system, always observe the applicable motor vehicle regulations
and road traffic regulations.
• Prior to all installation work, always disconnect the minus pole of the battery. This prevents the danger
of short circuits. Only connect the negative pole of the battery, when you have completely connected
the system and checked the connections. Observe the notices of the vehicle manufacturer in order
not to lose vehicle-specific data memory.
• Only use a volt meter or a diode test lamp for checking the voltage on the vehicle system leads, as
normal test lamps consume excessive voltage and may thus damage the vehicle’s electronics.
• When installing cables make sure that the connection cables are not squeezed or damaged by sharp
edges. Use rubber bushings for passing points.
• Modifications to the vehicle which are made necessary through the installation of the parking aid must
always be carried out in such a manner that neither the traffic safety nor the designed stability of the
car is impaired.
• If you are in doubt about where to install the device, consult your car dealer.
• Before drilling the attachment holes make sure that the electric cables, brake lines, the fuel tank or
similar systems will not be damaged.
• When using tools to install your parking aid, observe the manufacturers’ safety precautions.