Conrad Electronic 75 10 74, Руководство по эксплуатации

Страница: 62 / 148

Programming the access mode (multi-user mode only)
82 1 # Auto mode (default setting). The # key does not
need to be pressed after the code has been
entered. However, the user code
must have the
same number of digits as the master code.
82 0 # Manual mode. The # key must be pressed to
activate the code lock. The user code can have
between 4 and 8 digits, regardless of the length
of the master code.
Note: In single user mode, the user code and the master code
must be 4 digits long.
Programming the key tones.
83 1 # The key tone is generated each time a key is
pressed
83 0 # All key tones are switched off.
Door delay alarm
9 0 # The door delay alarm is switched off.
9 1 to 999 # Once the connection between the
terminal (-) GND ground and the terminal
„DOOR SENS“ is opened and the pro-
grammed time (1 to 999 seconds) has
expired, the alarm will sound until the con-
nection between the two terminals is
restored.
Be sure to respect the alarm duration prescribed by
the law. In Germany, the alarm may not sound for
longer than 3 minutes. If you own an alarm system, it
is your responsibility to ensure that this time is not
exceeded.
62