11
8. Operation/basic function
Please note:
In the delivery state the receiver components of the FS20
wireless control system do
not
respond to remote control
commands. They must first be addressed according to the
instructions provided in the respective device’s user manual.
Afterwards, the factory settings of the ‘FS20 FMS’ are active. In this case
turning the master on or off causes a power-on or power-off command,
respectively, to be transmitted.
The ‘FS20 FMS’ has a factory set, random house code and a random
address code that are transmitted when a receiver is registered.
You only have to changes these if you plan to expand your system with
additional FS20 components, or if you wish to integrate the ‘FS20 FMS’ in
an existing FS20 wireless control system.
The master device must consume at least 20mA in order for it
to be recognised as a load by the ‘FS20 FMS’.
This means that the minimum power consumption of the
master device is around 4.6W.
For devices that consume less power, proper functioning
cannot be ensured.
Содержание 623020
Страница 1: ...Version 12 06 OPERATING INSTRUCTIONS Load monitor FS20 FMS Item no 62 30 20 ...
Страница 35: ...34 ...
Страница 36: ...35 ...