Conrad Electronic 62 18 70, Руководство по эксплуатации

Страница: 14 / 32

Connection
The thermostat is equipped with a single-pole switch (changeover
contact). For the assignment, refer to the drawing. The protective
conductor (PE) must be connected with Protection Class I devices.
General connection instructions cannot be provided due to the
large number of devices and application purposes. Please
observe the contact assignment.
Notice on connection data!
The integrated switching contact is designed for a switching voltage of
400VAC, but the thermostat is only approved for a switching voltage
of max. 230 VAC. The maximum switching current is 16 A resistive
load and 4 A inductive load.
Mounting
The adjustment element on the thermostat is equipped with a 10-mm
thread (metric, left-handed thread) with a thread height of approx.
5 mm. When installing it in a device (e.g. refrigerator), observe the
P1
1
2
PE
14