Conquip Block Grab 800, Руководство пользователя

Страница: 6 / 7

11
User Guide - Block Grab
Disclaimer
Warranty
The products supplied by Conquip Engineering Group are all guaranteed by a 12 month warranty.
Apart from where exceptions apply, Conquip Engineering Group promises to repair or replace any fault which
the Company considers to be due to defective material or workmanship within 12 months of the date of sale,
at no additional cost.
• Faults arising from unauthorised alterations (see modifications section below for full details).
• Damage caused by abuse, neglect, misuse or falling.
• Damage caused because of failure to follow transportation, storage, loading, cleaning or
operating instructions.
• Replacement or repair of components due to fair wear and tear.
• Any consequential damage or wear arising from the use or fitting of additional or non-standard
parts.
Modifications
If any third-party modifications or alterations, involving drilling, welding, cutting or distortion of materials in
any form, are to be carried out on the product, Conquip Engineering Group must provide full written approval
prior to the work being carried out.
Alterations, modifications, additions or repairs must be carried out by Conquip Engineering Group’s
recognised distributors, if they are not carrying out the work themselves.
Conquip Engineering Group operate a continuous improvement policy and therefore reserve the right to alter
technical specifications and user guide details at any point without notice.
Conquip Engineering Group will not cover or reimburse any transportation and/or shipment costs to and
from their premises or their recognised agents, or any material and/or labour costs for repair, replacement or
assessment against a warranty claim.
Conquip Engineering Group and/or their directors, employees, insurers or recognised agents will not be held
liable for consequential damages, losses or expenses relating to the inability to use the product correctly for
its purpose.
EC Declaration of Conformity
In accordance with EN ISO 17050-1:2004
Declaration: As defined by the Machinery Directive 2006/42/EC and subsequent amendments
We, CONQUIP ENGINEERING GROUP, herewith declare that the following indicated equipment meets
the fundamental health and safety requirements concerning the EU guide line(s), due to their design and
manufacture.
This declaration will be rendered null and void if the machine is changed without our approval.
Signed: Dated: 2018
Garry Critchley, Managing Director
Product
Code(s):
CA105AE-00800 / CA105AE-01000
EC Directive/
Regulation:
2006/42/EC,
Lifting Operations and Lifting Equipment Regulations 1998
Provision and Use of Work Equipment Regulations 1998
Harmonised
Standards:
BS EN ISO 12100:2010
BS EN 13155
General
Description/
Designation:
Block Grab – CA105AE-00800 / CA105AE-01000
WLL:
CA105AE-00800 / CA105AE-01000 = 1800kg