Product name: Conquer Racing Simulator Seat
SKU: 355-RACESIM3
EMAIL:
TEL: 855-349-4327
help.ConquerEquipment.com
EMAIL: [email protected] WEB: help.conquerequipment.com TEL: 855-349-4327
1
2
3
4
5
6
Step 1: First, attach the rails to the base pieces with 4 M8 x 20mm bolts and Allen
wrench. The right side base has shifter mount near front (fig. 1), the right side rail is the
one
without
the seat adjuster handle. Thread front bolt, slide rail (fig. 2) to access rear
bolt (fig. 3) and attach, slide rail back and forth to tighten the bolts incrementally until
rails/bases are snug. Attach left rail (seat adjustment lever toward the front) to left base,
(fig. 4), disengage seat adjuster, slide rail to access rear bolt hole (fig. 5), thread on rear
bolt (fig. 6) then slide rail back and forth to tighten the bolts incrementally until
rails/bases are snug.
