INSTRUCTIONS: 5100557 - CONOCO APEX PUMP VALANCE
REV 10/1/2019
Sheet 9 of 10
Mounting on Bennett Pump Dispenser
(Requires Bracket Part No. 632548)
Step 2. Use 1/4”-20 screws (lifting lugs) on top of pump to attach Bracket Part No. 632548 (two brackets includ-
ed) to each end of pump as shown.
Step 1. Loosen screws holding Z-brackets (Part No. 681917) to valance.
Step 3. Lift valance on top of pump and use screws, washers, nuts provided with Bracket (Part
No. 632548) to attach Z-brackets to that bracket.
Step 4. Tighten screws, nuts holding Z-bracket to valance.
Z-bracket (Part No.
681917
)
Bracket (Part No. 632548)
Bracket PN 632548
Bracket PN 632548
(under Z-bracket)
Views of brackets
at both ends of
valance
Z-bracket
Z-bracket
Z-bracket
Assembly Instructions