INSTRUCTIONS: 5100557 - CONOCO APEX PUMP VALANCE
REV 10/1/2019
Sheet 8 of 10
Assembly Instructions
Mounting on Ovation or Ovation 2 Pump Dispenser
(Requires Bracket Part No. 382850)
Z-bracket (Part No. 681917)
Bracket (Part No. 382850)
Step 2. Use 1/4”-20 screws (lifting lugs) on top of pump to attach Bracket Part No. 382850 (two brackets includ-
ed) to each end of pump as shown.
Step 1. Loosen screws holding Z-brackets (Part No. 681917) to valance.
Step 3. Lift valance on top of pump and use screws, washers, nuts provided with Bracket (Part No.
382850) to attach Z-brackets to that bracket.
Step 4. Tighten screws, nuts holding Z-bracket to valance.
Bracket PN 382850
(under Z-bracket)
Z-bracket
Z-bracket
Bracket PN 382850
Views of brackets
at both ends of
valance