background image

14

Error / malfunction

Possible causes

The monitor does not 
display images within a 
few seconds after pressing 
the button on the remote 
control.

The signal connection 
between remote control 
and monitor is interrupted.

The signal connection 
between the monitor to 
the camera is interrupted.

2. Press the “▲”  or “▼”  button to choose a 

matching channel(C1 or C2). Press 

M

 button 

to confirm and the icon flickers.
3. Press the remote control, when you see the 
“NO” turns to “YES” on the screen, it means that 
the pairing of remote control is successfully done.
4. Waiting for 3s and the device exits the matching 
menu automatically. The pair is done.

If the indicator light does flicker twice within a few 
seconds after pressing the remote control but 
there are still no images displayed even when 
you press any button on the monitor. In this case 
the connection between the monitor and camera 
may be interrupted. Please try the following steps:

A. Turn on the switch for solar battery unit 

If the solar battery unit is switched off, please 
press the switch once and when the indicator 
light flickers once it means the battery unit is on.    

B. Charge your solar battery unit

The camera battery may be drained out and 
please have a try after charging.

Solutions / repair

Содержание CAM-KIT15

























Отзывы: