Receiver (Rx) Units
204 mm
(8.031 inch)
32 mm
(1.259 inch)
114 mm
(4.488 inch)
HDMX7-RX front and rear view
HDMX7D-RX front and rear view
1. to output device’s RS-232 port (ex. TV’s RS-232)
2. Power LED : show on/off
Link LED: IP network connectiong status
USB LED: USB control on/off from Rx unit
3. TX: IR Emitter cable
RX: IR Receiver cable
4. Reboot Tx unit
5. Select USB : Requires USB control on Rx .
Receive EDID—while powering on use Rx display’s
EDID to Tx unit
6. USB 2.0 Hub ports for USB devices
7. USB 1.1 port for USB HID devices
Lower USB port is also the USB 2.0 Hub port.
8. Set Rx unit Channel (0-16)
9. Confirm Channel Setting (while Rx is on)
Reset Channel to Factory Default, holding the button
while power on.
10. Select Network cabling
a. Lan cabling interface, UTP or Fiber
b. DVI-I analog output for non-HDCP content only
c. HDMI output to display/monitor
c1. DVI-D output to display/monitor
d. Analog Audio
Microphone in: works only in Extender Mode
Out: Audio out to speaker/ headphone
e. Connect to locking 5V3A DC switching power unit
f. Grounding Screw
a.
c.
d.
e. f.
b.
a.
c1
d.
e. f.
b
1.
2. 3. 4. 5.
6.
7.
8. 9. 10.
1.
2. 3. 4. 5.
6.
7.
8. 9. 10.
LB
1.52 LB
692 g
5
