Assembly Instructions
Platforms Assembly
Assembling the modules
1
2
3
4
1
Remove all packaging from corresponding high
and low tier boxes, taking care not to damage
any fabric/upholstery
2
The lower tier of the straight units are opened
simply by lifting upwards at the front cut-outs,
with gas struts holding the top panel open
3
Remove the top panel of the units by lifting
directly upwards with an even force from both
ends. This will unclip the button fix connectors
(pictured)
4
Position the two/three boxes as shown, aligning
the holes in the back of the low tier with the high
