17
any Warranty.
4.3 Firmware and Configuration Upgrade
This Managed Industrial Gigabit Ethernet Switch may perform firmware and
configuration upgrading when required. New firmware can be obtained from your
sales representative. For detailed upgrading procedures, please refer to the
Network Management User’s Manual.
Automatic Firmware and Configuration Upgrade via USB host
The Managed Industrial Gigabit Ethernet Switch
’s firmware and configuration
can also be upgraded automatically via USB host.
Allows the network administrator for
provisioning a device by just powering on and
inserting disk
Automatically upgrade firmware and/or
configuration when plug in an USB flash disk or
hard disk
USB support
Flash disk or hard disk (USB mass storage) with
partition (Logic unit number, LUN)
File system : FAT12, FAT16, FAT32,
NTFS3.1(read-only) and before
Automatic Firmware and Configuration Upgrade Process
Preparation steps before inserting the USB disk
Rename the firmware name as:
cts-fw-<model_name>.<admin_user>.<password>
Rename the configuration file name as:
cts-cfg-<model_name>.<admin_user>.<password>
