Page 5 of 8
WIRE CONNECTIONS FOR MAIN CONNECTOR HARNESS
PIN
Connect2Car
Unit Wire
Connection point
Comments
1
BLACK
Reserved. Ignore
2
BLUE
Reserved. Ignore
3
GREEN
Reserved. Ignore
4
BLUE
Reserved. Ignore
5
GREEN
Reserved. Ignore
6
BLUE
Reserved. Ignore
7
GREEN
Reserved. Ignore
8
WHITE
Arm input (negative input)
Connect to Arm output of Aftermarket/factory Alarm
9
ORANGE
Reserved. Ignore
10
WHITE
Door Trigger Negative Wire.
( needs positive input)
Connect to door pin sensor or dome light output or any
sensor you want to trigger an Alarm alert when unit is
armed.
Once this input is triggered, it will send an alert to the
owners phone.
11
ORANGE
ignore
12
WHITE
Disarm input (negative input)
Connect to Disarm output of Aftermarket/factory Alarm
13
ORANGE
Reserved. Ignore
14
WHITE
Ignition Positive Wire
(Positive input)
Connect to the Ignition wire of the vehicle to detect when
ignition is on.
15
ORANGE
Reserved. Ignore
16
YELLOW
Ignition Kill/ Starter kill
-‐ (negative output)
Should be connected to an ignition kill, starter interrupt
relay.
17
ORANGE
Reserved. Ignore
18
BLACK
5V accessories Ground
Ignore (optional)
19
PURPLE
5V accessories output
Ignore (optional)
20
YELLOW
Remote Start Activation.
-‐ Negative output
Connect to
Remote Starter Activation input of aftermarket
remote starter
21
YELLOW
Door Lock Output/Arm.
-‐ Negative output
Connect to
Door Lock.
Also connect to
Arm wire input
of Factory Alarm or
Aftermarket Alarm.
(if available)
22
YELLOW
Door Unlock Output/Disarm
-‐ Negative output
Connect to
Door Unlock
Also connect to
Disarm wire input
of Factory Alarm or
Aftermarket Alarm
(if available)
23
BLACK
Ground -‐
Connect to Battery Negative
24
RED
Power 12V +
Connect to Battery Positive
Note:
All the wires are also labeled on the harness for easier installation
