COVER ASSEMBLY
PLUG ANTENNA WIRES HERE
(
REFER TO MANUAL
)
SCREW, M3.0, 5.0 mm, PFHMS; QTY. 4
SHEET 10 OF 12 CTIX-00482(0.02) 07/12/2018
TOOL: PHILLIPS SCREWDRIVER
COVER ASSEMBLY w/ANTENNA INSTALLATION -
OPTIONAL
STEP 7:
* NOTE THE RJ45 CONNECTOR SHOULD COME THROUGH THE COVER CUT OUT.
PROPERLY DRESS THE ANTENNA WIRES AS SO NOT TO INTERFERE WITH THE FAN OR
1.
CAUSE BINDING WITH THE MATING PARTS.
PLUG ANTENNA WIRES INTO THE MODEL. SEE MANUAL SECTION FOR REFERENCE.
2.
CAREFULLY SLIDE THE COVER ASSEMBLY ONTO THE BASE ASSEMBLY.
3.
MAKE CERTAIN TO PROPERLY DRESS THE FAN WIRES AS SO NOT TO INTERFERE WITH
4.
THE FAN OR CAUSE BINDING WITH THE MATING PARTS.
LOOSELY FASTEN THE SCREWS IN 4 PLACES.
5.
GO BACK AND TIGHTEN ALL FASTENERS.
6.
RECOMMEND LIGHT DUTY THREADLOCKER ON THREADS ON SCREWS.
RECOMMEND TORQUE TIGHTEN THE SCREWS TO 3.1 in-lb.
