NVIDIA Jetson® AGX Xavier™ GMSL Camera Platform
Users Guide
Document: CTIM-00077
Revision: 0.03
Page 12 of 14
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2020-03-02
Power & Thermals
External Power connector
Al12V is available on the Rogue Carrier (Rev. C and higher), the JCB002 allows for external
power to be provided to the cameras. The voltage is unregulated and could potentially damage
cameras if they cannot handle the input voltage.
Test setup:
-
Rogue AGX minimal setup carrier powered at +13V/XXXA
-
Up to 8 ECON NileCAM30 connected.
Parameter
Min
Typ
Max
Units
Power Over Coax
External Supply Voltage (unregulated)
10.45
12
14.6
V
External Supply Current (per channel)
-
-
1.1
A
No Cameras Connected
Internal current consumption (From Rogue)
-
0.395
1.6
A
1 Camera Connected
Internal current consumption only
0.26
0.46
-
A
Internal current consumption
0.118
0.32
-
A
External current consumption
0.154
0.154
0.3
Temperature Rise (Above Ambient)
-
-
19
°C
2 Cameras, Same Deserializer
Internal current consumption only
0.4
0.753
-
A
Internal current consumption
0.115
0.458
-
A
External current consumption
0.303
0.303
0.6
Temperature Rise (Above Ambient)
20
°C
2 Cameras, Different Deserializers
Internal current consumption only
0.408
0.765
-
A
Internal current consumption
0.125
0.471
-
A
External current consumption
0.303
0.303
0.6
Temperature Rise (Above Ambient)
-
-
20.5
°C
8 Cameras
Internal current consumption only
1.285
1.755
-
A
Internal current consumption
0.155
0.615
-
A
External current consumption
1.172
1.172
2.3
Temperature Rise (Above Ambient)
-
-
24
°C
Note:
1.
Since the Rogue carrier can be populated in many different configurations, the current consumption is listed excluding power needed
to run the Rogue (and Xavier Module) itself, i.e. the value in the
No Cameras Connected
section.
2.
Minimum current is defined as when the cameras are not streaming, maximum is the peak surge current and typical is current
consumption during streaming.
