![Connect Tech Echo/ISA Скачать руководство пользователя страница 56](http://html.mh-extra.com/html/connect-tech/echo-isa/echo-isa_user-manual_2652780056.webp)
3-32
Chapter 3: Software Installation - Windows 95
Echo
User's Manual, ver. 0.00
UART/FIFO Configuration
To configure the Echo Enhanced Driver for the appropriate
UART type please follow these steps:
1.
From the
CONTROL PANEL
double click on the
SYSTEM
icon.
2.
The
SYSTEM PROPERTIES
dialog box will pop up and click
on the
DEVICE MANAGER
tab.
3.
Double click the
PORTS (COM & LPT)
section.
4.
Double click the COM port you want to change. This will
bring up a
PROPERTIES
page.
5.
Click on the
ENHANCED PORT SETTINGS
tab.
6.
Click on the
ADVANCED
button. The
ADVANCED PORT
SETTINGS
dialog box will pop up.
7.
Check the
USE FIFO BUFFERS
box and select the 16554
UART choice. When you select
USE FIFO BUFFERS
you
enable the two sliders labeled
RECEIVE BUFFER
and
TRANSMIT BUFFER
. Moving a slider to the right, enables more
buffering resulting in higher speeds and lower load on the
system. However high buffer levels can cause connection
problems. Usually it is best to set the
RECEIVE BUFFER
at one
notch below the highest setting and the
TRANSMIT BUFFER
at
the highest setting. Then click
OK
.