Connect Tech Blue Heat/Net Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 105

background image

Connect Tech Blue Heat/Net User’s Manual

90 Revision 0.13

Note: If you purchased a Blue Heat/Net before April 2005, you
should update your firmware using Connect Tech's FTP site.
This option is available in the

Firmware

section in the Web

Configuration Manager.
Should you have any problems, try updating again and then
contact

Connect Tech Technical Support

.

Firmware Upgrades

If you need to re-install your current firmware, it is located in the firmware directory of the CD
you received with your Blue Heat/Net.

Newer firmware versions are available from Connect Tech’s website,

http://www.connecttech.com/asp/Support/DownloadZone.asp

. Choose Blue Heat/Net product.

Ensure the following parameters are set:

mip, sip, gip

and

dns_ip

using either the SCM or TCM.

To upgrade your Blue Heat/Net firmware, you can use any of the following three methods,
depending on your preference.

Upgrade using WCM (Web Configuration Manager)

The Web Configuration Manager is the easiest way to upgrade your firmware. Simply log onto
the WCM as described in the

WCM

section, and click on the Firmware link on the left menu.

This will bring you to the Firmware page. You will have the option to upgrade from the remote
CTI website, or to download the upgrade from a local FTP server.
If you choose to upgrade via a local FTP server, copy the firmware (*.tar) file to the anonymous
directory of a local FTP server. If you do not have a local FTP server, contact your system
administrator to set one up.

Upgrade using TCM (Telnet Configuration Manager)

Using the TCM application to upgrade your firmware requires you manually copy the firmware
from the CTI website to the anonymous FTP directory of you server. Then Telnet to the Blue
Heat/Net unit, log in as TCM and use the update command to complete the upgrade. The
upgrade command supports an option to upgrade from Connect Tech’s FTP directory.

Upgrade using SCM (Serial Configuration Manager)

The SCM method of upgrading is used when the Blue Heat/Net does not boot properly. You can
reinstall your original firmware from the supplied CD, or you can download any newer versions
that exist from the CTI website in the

Download Zone

or go directly to the FTP site as indicated

below.

You will need the use of a TFTP server. (Contact your system administrator to obtain access to
a TFTP server). Download the most recent firmware components from the FTP site

ftp.connecttech.com/pub/BHN/ .

These files include

BHNuClinux_X.XX.gz

,

BHNloader_VXXX.gz

and

BHNjffs2_X.XX.gz.

These files contain all of the Blue Heat/Net firmware. Follow the

update

command instructions

for the

SCM

to update each component.

«
...
81
82
83
84
85
...
»

Содержание Blue Heat/Net










































































































Отзывы:

Нет отзывов

Похожие инструкции для Blue Heat/Net

Бренд: National Instruments Страницы: 28

Бренд: National Instruments Страницы: 19

Бренд: National Instruments Страницы: 36

Бренд: National Instruments Страницы: 103

NI PXI-1042 Series

Бренд: National Instruments Страницы: 12

Бренд: National Instruments Страницы: 4

Бренд: ebm-papst Страницы: 16

Бренд: FS Страницы: 19

Бренд: B&B Electronics Страницы: 2

Digital Encoder Plus

Бренд: IDT Страницы: 98

InnoMedia MTA 3328-2R

Бренд: VoiceLine Страницы: 18

Бренд: Leviton Страницы: 4

Бренд: TP-Link Страницы: 37

Бренд: Wyse Страницы: 8

Бренд: iGateWeb.com Страницы: 6

Бренд: Axis Страницы: 98

Ethernet MCA 10/100 Adapter

Бренд: Olicom Страницы: 88

Бренд: EZCast Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды