Connect Tech Blue Heat/Net Скачать руководство пользователя страница 81

Страница: 81 / 105

Connect Tech Blue Heat/Net User’s Manual

88 Revision 0.13

Removing your Blue Heat/Net:

Selecting

Remove Blue Heat/Net

in the Action menu will remove the Blue Heat/Net device you

have selected from your system. To remove more than one Blue Heat/Net at a time, select

Blue Heat/Net Places

, and either right-click or choose

Action

from the menu, and select

Remove

All Blue Heat/Net

. This will remove all Blue Heat/Nets located on your system.

Blue Heat/Net Properties:

This provides information about the Blue Heat/Net you have selected. It includes Host name,
MAC address, IP Address, Serial No., CDS Version, uClinux Version, Boot Loader Version,
and the Number of Ports on your Blue Heat/Net.

Figure 48: Blue Heat/Net properties

Driver Removal

Located under the

Tools

menu, choosing

Remove Drivers

while the Blue Heat/Net unit is selected

will remove the drivers for units on your system. A warning box will appear to ensure you wish
to continue. Click

to remove all Blue Heat/Net device drivers.

Figure 49: Remove Drivers window

Содержание Blue Heat/Net










































































































Результаты поиска

Содержание Blue Heat/Net

Отзывы:

Connect Tech Blue Heat/Net, Руководство пользователя, Страница: 81 / 105

Результаты поиска

Содержание Blue Heat/Net

Отзывы: