Connect One
II-EVB-365 SMT
User’s Manual
7
7.
Change the LAN type parameter to 2 (LAN) using the following command:
AT+iLTYP=2
8.
Enter
AT+iDOWN
in order to reset the module and connect to the LAN
network.
To test the connection, use the iChipConfig utility to perform any activity that
requires network connection such as retrieving a web page, sending an email,
or opening a socket. You may also try to PING the iChip from another station
on the network.
9.
Restore the LTYP parameter to zero to return to the default Wireless-LAN
operation.
7.
Additional Connections
The modules support two additional connections:
SPI Slave
The modules support an alternative Host interface to the RS232 Serial port and the
USB connection. A host equipped with an SPI Master connection may connect to the
module’s SPI Slave port and interact with the module with AT+i commands.
An SPI cable (not supplied) connects to the II-EVB-365 SMT J2 SIP connector:
A full description of interfacing the modules with SPI is included below in Appendix 4.
nSPI_INT
nSPI_MISO
nSPI_MOSI
nSPI_CLK
nSPI_CS
GND
J2
1
