Connect One
II-EVB-365 SMT
User’s Manual
11
Appendix 2: Installing USB Drivers on a PC
Installing the USB driver:
The USB driver is supplied in three separate files:
sabalo.inf
,
iChip.inf
and
usbser.sys
.
These files may be obtained on the Connect One Web site under:
Support >> Drivers & Utilities at:
http://www.connectone.com/support.asp?did=30
.
1. Copy “sabalo.inf” and “iChip.inf” to the directory C:\WINDOWS\inf. To view the \inf
directory, you must allow viewing of hidden folders in Folder Options.
2. Copy usbser4.sys to C:\WINDOWS\system32\drivers.
3. Connect one end of a USB cable to your PC. Connect the other end to the USB
“device” connector of the II-EVB-365 SMT board on which the
module
is mounted.
4. Turn on the power to the EVB board.
5. The “Found New Hardware Wizard” of Windows XP pops up and prompts you to
install a new device driver. When prompted with the message “Can Windows connect
to Windows Update to search for software?” Select
No, not this time
. See Figure 1.
Figure 1
