3
1. Introduction
CP1000 is a flexible keypad and proximity reader in one unit for may different applica
-
tions.
In standby the yellow LED is lit (
●
○ ○)
By correct code/tag lights the yellow and green LED (
●
●
○)
By incorrect code/tag lights the red LED (
○ ○
●
)
CP1000 has a buzzer for indicating while keying, correct code/tag, incorrect etc. and
2 transistor outputs, independant from each other, so the CP1000 can give access by
code and proximity tag.
The CP1000 is a stand alone unit, that can be programmed directly by Master code
and Service code.
2. Installation
Mount the reader on a even surface (use the following drill template for precise fit
-
ting).
Connect the wires to power supply, door strike, assembly board etc.
Note:
Right after applying the voltage all LED’s lights and the buzzer sounds
do not
touch the reader untill the yellow LED is lit and the buzzer is silent.
See connection examples og page 13.
9 - 25 VDC / 30 mA
0V GND
Output 2 open collector, 500 mA, 0V active
External controlling green LED, 0V active
Output 1 open collector 500 mA, 0V active
External buzzer / high security
External controlling red LED, 0V active
REX, 0V active
CT 2000 Prox
ALARM SYSTEM A/S
Prox
1
3
5
7
9
2
4
6
8
0