4.4 Change the Service code
The Service code is used to configurate the CM1000’s settings.
To change the Service code, enter the following within 10 seconds after power on:
*
*
*
*
F
4.5 LED indications
The CM1000’s 3 LED’s can be adjusted at will.
To adjust the LED indications enter the following:
adjust the LED’s for standby indication (normal).
adjust the LED’s for correct code/tag indication (active).
adjust the keying indication (how the LED will react while keying).
To adjust the LED’s press on the following:
= yellow LED (toggle by press)
= green LED (toggle by press)
= red LED (toggle by press)
= buzzer (works only on active and keying indication (toggle by press))
= save and go one step back
To save the settings press
or press
/
to go back to the previous
point (not saving).
#
Key in the
Service code
#
Key in
01
#
Key in a new
code or show tag
#
Repeat new
code/tag
#
02
#
1
#
2
#
3
1
2
3
0
#
8
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
#
*
