CONITEC GALEP-5, Руководство пользователя

Страница: 2 / 30

Installing GALEP-5/5D for USB port
When the GALEP-5 is first connected to a Windows PC, the Windows hardware assistant activates
automatically to install a new hardware driver. Prior to this step, make sure the required driver files are
available on the PC, either by having pre-installed the software from the CD – the drivers are then typically
located in the subdirectory: "
C:\program files\GALEP5\G5Driver " - or in the " G5Driver " subdirectory of the
GALEP5 software CD.
Important! The installation process will vary slightly depending on the Windows version running on your PC. In
all cases, do not initiate a Windows Assistant automated search for any driver - you will instead need to
enter / select one or the other, of the 2 directories mentioned above (i.e. either the installed GALEP5 software
driver subdirectory, or the driver subdirectory located on the inserted CD).
After connecting the GALEP-5 to an USB cable and to the PC, initially only the white LED will blink. After a
short pause, the embedded LINUX boot process will complete. Shortly afterwards, the red LED will light up,
and a dialogue box will display on screen asking if you wish to open a connection via the automated Windows
updater utility to seek an appropriate driver. Here you will need to select the "No" option, and then click.
In the next dialogue window, you’ll need to select the option requesting that only software from a specified
source is to be installed. After this option is selected, click "Continue" again.
In the next step, select "Browse" and open a navigation window – steer the process to the subdirectory where
your "G5Driver" is located (either from CD or C:\program files\GALEP5\G5Driver). Conclude this step by
clicking "OK".
Now the option "Conitec GALEP-5 Programmer" should be selected. Proceed then by clicking all the following
"Continue" buttons (or similar) until all the installation windows have completed and are closed.
After a successful installation, you should find an entry for the GALEP-5 in the Windows network environment,
this connection is set up and used by the GALEP5 software. You can also use any web browser with the IP
address
192.168.167.12 to get some device information from the GALEP-5.
Installing GALEP-5D for Ethernet port
Alternately, GALEP-5D can be connected via Ethernet. The default IP address on the Ethernet port is
192.168.1.13 . The address can be changed via a web browser.