Congo Play MONKEY PLAYSYSTEM FORT, Руководство по сборке

Страница: 11 / 32

PHASE 3
FRAME ASSEMBLY - cont.
STEP 1: Gather parts and hardware shown in table 3.
NOTE: An adult helper is required to stand
phase 2 frame assemblies upright
and hold in place until phase 3 is
complete.
STEP 4: Attach floor caps 'G' to fort uprights 'A'&'B'
with 05/16" x 3" lag screws and
05/16" flat washers.
*** Floor caps 'G' are 3/4" higher than
floor joist 'I'. (See Detail-1)
NOTE:
Make sure frame is level and square
before attaching floor caps 'G'.
8!5/16" x 3" LAG SCREWS -,-:,
85/16" FLAT WASHERS -'
TABLE 3 - PARTS AND HARDWARE
It> LE'TTER DESCRIPTION
C
FORT GROUND BEAM
H
SANDBOX BOAR!)
G FLOOR CAPS
8!5/16" x 3" LAG SCREWS
85/16" FLAT WASHERS
STEP 2: Attach fort ground beam 'C' to fort
uprights 'A' with 05/16" x 3" lag screws
and 05/16" flat washers.
QTY
2
14
14
STEP 3: Attach sandbox board 'H' to fort uprights 'B'
with 05/16" x 3" lag screws and
05/16" flat washers.
8!5/16" x 3" LAG SCREWS
/� 85/16" FLAT WASHERS
/
DETAIL - 1
85/16" x 3" LAG SCREW
-✓-�
8!5/16" FLAT WASHERS
G
*Sandbox Upgrade - I f y ou ordered the sandbox k it
attach additional E's and H's abo v e the ground le v el
using 5/16" x 3" lag screws and 5/16" washers pro v ided. *