QBVS110 12
ENGLISH
Installation (continued)
INSTALLING THE GRILLE
-
Squeeze the springs on the grille together, and insert the
springs into the slots of the housing assembly . Firmly push
the grille up against the ceiling. See figure 20.
Spring slot
Ceiling
Fig . 20
Operation
TURNING ON/OFF THE UNIT
-
This ventilation fan with light can be operated with an external
ON/OFF switch or two-function wall control.
WARNING:
To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device .
Care and Cleaning
WARNING:
Failure to maintain basic standards of care and cleaning of the ventilation fan incr
eases the risk of fire, electric shock,
or injury to persons. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means
to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
The ventilation fan should be cleaned regularly (internally and externally) to preserve its appearance and performance . Remove grille to
clean interior of ventilation fan .
Do:
Do Not:
-
Use a dusting brush attachment to gently vacuum
the exterior and interior of the ventilation fan to
remove dust and debris .
-
Do not let plaster dust or any other construction
residue enter the fan . During construction or
renovation, cover the fan .
-
Combustible products used for cleaning such as
acetone, alcohol, ether, or benzol are highly explosive
and should never be used close to the fan .
