Congatec conga-IA5, Руководство пользователя

Страница: 56 / 59

Copyright © 2017 congatec AG IA50m10 56/59
Pin Signal name Pin Type Voltage
level
Onboard
termination
Description
28 GPI3 Input 3.3V PU 10k General purpose input at Board controller
29 GPI4 Input 3.3V PU 10k General purpose input at Board controller
30 GPI5 Input 3.3V PU 10k General purpose input at Board controller
31 GPI6 Input 3.3V PU 10k General purpose input at Board controller
32 GPI7 Input 3.3V PU 10k General purpose input at Board controller
33 SLP_S3# Output 3.3V standby S3 sleep control (suspend to RAM), active low
34 SLP_S4# Output 3.3V standby S4 sleep control (suspend do Disk), active low
35 SLP_S4# Output 3.3V standby S4 sleep control (suspend do Disk), active low
36 CGBC_LID_BTN_L Input 3.3V standby PU 10k connect directly to LID switch, active low
37 CGBC_SLP_BTN_L Input 3.3V standby PU 10k connect directly to Sleep button, active low
38 PM_THRM# Input 3.3V standby PU 100k external Thermal event, active low
39 WDOUT Output 3.3V PD 10k Watchdog event output (Board controller), event after timer expires
40 WDTRIG_IN# Input 3.3V PU 10k Watchdog trigger input (Board controller), timer reset, active low, use OD
pin at external device
41 CGBC_SDA I/OD 3.3V standby PU 2k I2C bus from Board controller (general use), data
42 PWR_OK Input VIN 10k PD Power good signal from external PSU or Voltage Monitor. Onboard power
rails are disabled if signal is low.
43 SPI_CS#_EXT Output 3.3V standby PU 100k SPI chip select for external SPI flash
44 CGBC_SCL OD 3.3V standby PU 2k I2C bus from Board controller (general use), clock
45 SPI_MISO_EXT Input 3.3V standby external SPI flash data output
46 BIOS_DISABLE# Input 3.3V standby PU 10k external SPI flash enable (boot from external SPI flash), active low
47 SPI_CLK_EXT Output 3.3V standby external SPI flash clock input
48 SPI_MOSI_EXT Output 3.3V standby external SPI flash data input
49 +5V standby Power 5V standby +5V standby power, 500mA max.
50 GND Ground
Connector Type
X35: 25x2 pins, 2mm pitch