manualshive.com logo in svg

Congatec COM Express conga-TC87, Руководство пользователя

Поделиться
Скачать
Congatec COM Express conga-TC87 Скачать руководство пользователя страница 87

Copyright 

© 

2013 

congatec 

AG 

 

      TU87m12 

       

87/114

Feature

Options

Description

No-Snoop Latency Override

Disabled
Manual

Auto

No-Snoop latency override for PCH PCIe.

No-Snoop Latency Multiplier

1 ns, 32 ns, 1024 

ns

32768 ns, 1048576 ns
33554432 ns

No-Snoop latency multiplier for PCH PCIe.

No-Snoop Latency Value

0-252
Default : 

60

No-Snoop latency override for PCH PCIe.

11.4.6 

ACPI Submenu

Feature

Options

Description

Hibernation Support

Disabled

Enabled

Enable or disable system ability to hibernate (operating system S4 sleep state). This option may not be 
effective with some operating systems.

ACPI Sleep State

Suspend Disabled 
S1 only (CPU Stop Clock)

S3 (Suspend to RAM)

Both S1 and S3 available for 
OS to choose from

Select the state used for ACPI system sleep/suspend.

Lock Legacy Resources

Disabled

Enabled

Enable or disable locking of legacy resources.

S3 Video Repost

Disabled

Enabled

Enable or disable video BIOS re-post on S3 resume. Required by some operating systems.

ACPI Low Power S0 Idle

Disabled

Enabled

Enable or disable ACPI Low Power S0 Idle support.

Native PCI Express Support

Disabled

Enabled

Enable or disable native OS PCI Express support.

Native ASPM

Disabled

Enabled

Enabled = The OS will control the ASPM support of the PCI Express device.
Disabled = The BIOS will control the ASPM support of the PCI Express device.

ACPI Debug

Disabled

Enabled

Open a memory buffer for storing debug strings. Use method ADBG to write strings to buffer.

ACPI 5.0 CPPC Support

Disabled

Enabled

Enable ACPI 5.0 Collaborative Processor Performance Control (CPPC) support. 
When enabled, platform exposes CPPC interfaces to operating system. 
When disabled, platform exposes legacy (non-CPPC) processor interfaces to operating system.

ACPI 5.0 CPPC Platform SCI

Disabled

Enabled

Enable ACPI 5.0 platform generation of SCI on CPPC command completion. 
When enabled, platform generates GPE/SCI. 
When disabled platform does not generate GPE/SCI and OS polls for command completion.

Active Trip Point

Disabled, 15 C, 23 C, 
31 C, 39 C, 47 C, 
55 C, 63 C, 

71 C

, 

79 C, 87 C, 95 C, 
103 C, 111 C, 119 C

Specifies the temperature threshold at which the ACPI aware OS turns the fan on/off.

Содержание COM Express conga-TC87



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды