manualshive.com logo in svg

Congatec COM Express conga-TC570r, Руководство пользователя

Поделиться
Скачать
Congatec COM Express conga-TC570r Скачать руководство пользователя страница 40

Copyright 

© 

2022 

congatec 

GmbH 

 

      TCTOm01 

       

40/70

For more information about Intel

®

 Turbo Boost Technology, visit the Intel

®

 website. 

 

Note

1.  Only conga-TC570r variants that feature the Core™ i7, i5 and i3 processors support Intel

®

 Turbo BoostTechnology. Refer to section 1.2 

“Options Information” for information about the maximum turbo frequency available for conga-TC570r variants.

2.  For real-time sensitive applications, disable EIST and Turbo Mode in the BIOS setup to ensure a more deterministic performance.

3.  Disable Turbo mode for industrial use condition applications.

7.3 

Intel

®

 Virtualization Technology

Intel

®

 Virtualization Technology (Intel

®

 VT) makes a single system appear as multiple independent systems to software. With this technology, 

multiple, independent operating systems can run simultaneously on a single system. The technology components support virtualization of 
platforms based on Intel architecture microprocessors and chipsets. Intel

®

 Virtualization Technology for IA-32, Intel

®

 64 and Intel

®

 Architecture 

(Intel

®

 VT-x) added hardware support in the processor to improve the virtualization performance and robustness. 

RTS Real-Time Hypervisor supports Intel VT and is verified on all current congatec x86 hardware.

 

Note

congatec supports RTS Hypervisor.

7.4 

Thermal Management

ACPI is responsible for allowing the operating system to play an important part in the system’s thermal management. This results in the 
operating system having the ability to implement cooling decisions according to the demands of the application.

The conga-TC570r offers hardware-based support for passive and active cooling. Passive cooling is implemented in the Intel CPU via the 
Thermal Control Circuit (TCC ) Activation Offset setting in the CPU configuration setup sub-menu. The TCC in the processor is activated at 
100°C by default but can be lowered by the Activation Offset—for example, an activation offset of “10” will activate TCC at 90°C. ACPI OS 
support is not required. See section 7.1 “Adaptive Thermal Monitor and Catastrophic Thermal Protection” for more information. 

The congatec board controller supports active cooling solution. The board controller controls the fan’s speed based on the temperature 
readings of the CPU. This feature does not require ACPI OS support. The only software-controlled thermal trip point on conga-TC570r is the 
Critical Trip Point. 

Содержание COM Express conga-TC570r







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды