Copyright
©
2017
congatec
AG
TSKLm16
2/71
Revision History
Revision Date (yyyy-mm-dd) Author Changes
0.1
2017-03-13
AEM
•
Preliminary release
1.0
2017-08-01
AEM
•
Updated sections 2.5 “Power Consumption” and 2.6 “Supply Voltage Battery Power”
•
Updated sections 10 “Resource List” and 11 “BIOS Setup Description”
1.1
2018-05-07
AEM
•
Corrected the unit of measurement in table 5 “Power Consumption Values”
•
Corrected a typographic error in section 6.1.11 “General Purpose Serial Interface”
•
Corrected the pin numbers of USB ports 0 and 1 in table 16 “USB SignalDescriptions”
1.2
2018-08-24
AEM
•
Updated the cooling diagrams and heatspreader thermal imagery in section 4 “Cooling Solutions”
1.3
2018-10-12
AEM
•
Added note about recommended boot mode in section 2.2 “Supported Operating Systems”
•
Changed Intel 100 series PCH to Intel PCH
1.4
2019-04-25
AEM
•
Updated all cross references
•
Updated section 2.3 “Mechanical Dimensions”
•
Updated sections 4 .1 “CSA Dimensions”, 4.2 “CSP Dimensions”, 4.3 “HSP Dimensions”
•
Updated sections 11.3 “Updating the BIOS“ and 11.4 “Supported Flash Devices”
1.5
2020-05-08
AEM
•
Updated section 4 “Cooling Solutions”
•
Corrected the resolutions for three independent displays in table 7 “Maximum Supported Resolutions”
•
Updated the link for power supply implementation guidelines in section 6.1.13 “Power Control”
•
Added note about the minimum pulse width required for proper button detection in table 24 “Power and System
Management Signal Descriptions”
•
Added information about congatec MLF file to section 11 “BIOS Setup Description”.
•
Corrected typographic error in section 11.5 “Supported Flash Devices”
•
Deleted section 12 “Industry Specifications”
•
Restructured the whole document
1.6
2021-04-19
AEM
•
Updated table 2 “conga-TS175 Variants, table 3 “Feature Summary”, table 8 “Maximum Supported Resolutions” and
table 16 “TMDS Signal Descriptions”
•
Updated section 3 “Block Diagram” and section 6.1.3 “Display Interfaces
•
Deleted section 6.1.3.2 “HDMI” and section 6.1.3.4 “DVI”
•
Added note to table 16 “TMDS Signal Descriptions”
