background image

General Safety Instructions

Read this instruction manual thoroughly before using the appliance and save it for future reference and
if necessary pass the instruction manual on to a third party.

WARNING: 

When using electrical appliance, basic safety precautions should always be followed to

reduce the risk of fire, electrical shock and personal injury.

INSTALLATION INSTRUCTION FOR CEILING FAN

MODEL:R52001-5-1L

PRODUCT:FLORIDA

         

GB

Page1

NO:000

1) General

1.

Check if the electrical specifications of this appliance are compatible with your installation.

2.

Unauthorized use and technical modifications to the appliance can  lead to danger to life and health.

3.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.

6.

This appliance is for indoor use only.

7.

Means  for  disconnection  must  be incorporated in the fixed wiring in accordance with the wiring rules.

8.

Never install the appliance in a moist or wet room.

9.

Be careful when working near the rotating blades.

.

f

l

e

s

t

i

 

g

n

il

i

e

c

 

e

h

t

 

o

t

 

t

u

b

 

,

t

n

i

o

p

 

r

e

w

o

p

 

a

 

o

t

 

n

a

f

 

e

h

t

 

h

c

a

t

t

a

 

r

e

v

e

N

.0

1

11. Switch  off  the  power  before  connecting or repairing the fan.

12. The electrical wiring must be in accordance with the local regulations.

13. The fan must be properly grounded to avoid the risk of electric shocks.

2) Electrical safety

14. The appliance should be installed by authorized 
         electrician only acc. to national wiring rules.

Specific Safety Rules

15. The fan is to be installed so that  the blades 
         are more than 2,3 m above the floor and 
         distance to wall Min 0.5m. 

16. The minimum carrying capacity of the outlet box from which the fan is hung must be 40Kg.

17. Install the luminaire into the fan, to make a complete product.

18. The mains supply to this appliance must be via all pole disconnection switch (Live and Neutral wires), 
         the switch must have a  contact separation of at least 3 mm.

19. To reduce the risk of fire or injury, do  not use this product in conjunction  with  any  variable  (Rheostat) 
        wall control or dimmer.

500 mm

Wall

2.3 metre

Floor

20.    The power supply must be disconnected before installation of the fan, or during the maintenance and cleaning, 
          in case of doubt, contact a qualified electrician.

21.    When changing the bulb, switch off and disconnected from the power supply and allow the old bulb to cool down 
         before handling.

4.

Children shall not play with the appliance.

5.

Cleaning and user maintenance shall not be made by children without supervision.

22.    Regarding the instructions for the fan that intended to be fixed by screws on the method of fixing and how to install 
         the appliance, thanks to refer to the section “INSTALLATION”.

 

23.    Regarding the method of the cable connection, thanks to refer to the section “INSTALLATION”.

 

24.    Regarding the instructions for the blub replacement and the type reference of the luminaire, thanks to refer to the 
         section “INSTALLATION”.

 

Содержание FLORIDA R52001-5-1L













Отзывы: