Conexx CX39A19, Инструкция по эксплуатации

Страница: 18 / 20

Problem Solution/Issue
TV does not
operate
Make sure the power cord is plugged in.
Try another AC outlet.
Unplug unit for an hour, then plug it back in.
Normal picture, but
no sound
Check the volume settings.
Sound muted? Press MUTE button.
Try another channel.
Check audio cable connections.
The remote control
does not work
Make the remote control is in range with no obstructions.
Check the batteries.
Correct operating mode set: TV, VCR etc.
Poor sound or no
sound
Station or Cable TV experiencing problems, tune to another station.
Check sound adjustments (Volume or Mute).
Check for sources of possible interference.
Poor picture or no
picture
Station or Cable TV experiencing problems, tune to another station.
Make sure channels are set into memory.
Check antenna or Cable TV connections, adjust antenna.
Check for sources of possible interference.
Check picture control adjustments.
Poor TV reception
Adjust the antenna position to a stronger signal receiving angle.
Check the Antenna connection is tight to the TV.
Check there is power supplied to the Antenna distribution box.
RV.
Ensure the internal RV coax jump cable is connected to the correct port.
Poor Cable /
Satellite TV
Reception
Check incoming Cable is connected correctly to RV.
Ensure cable splitter box has power.
RV.
Ensure the internal RV coax jump cable is connected to the correct port.
Check Dish has not obstruction.
Sleep Timer is set.
Power interrupted.
TV AV input plays
black and white
Check RCA connections on the back of the TV and from the source to ensure they are connected to
the correct connections. Ensure the yellow connection is in the correct port.
Trouble Shooting
16